Why is My Dlink Router Not Working?

Through this post, we will tell you how to troubleshoot D-Link router problems and help you to repair them. Here you find out the solution why D-Link router not working, you can follow the guide which is given below.

Reason: Why D-Link Router Won’t Work:

It is the most common issue within the Dlink router community. Let’s discuss the problems which might be the reason behind your D-Link router not working.

• Overheating and power supply issues.
• Latest firmware update or incorrect configuration.
• ISP problems etc.
• In some cases, it occurs due to IP address misguided from one device overlay to another device to get router work.

In case you forgot the password of your Dlink wireless router, you have only one option is to reset the Dlink router to factory defaults. That time you can use the pin and press for a few seconds on the reset hole in the side or bottom of the router.

Hold and press unless the power button blinks. And wait for a minute to reset the router and switch on.

Methods to Fix D'Link Router not Working Issues:

These are the methods through which you can fix your problem.

• Restart your internet modem & D-Link router together.
• Confirm that your Modem to router connection cable is connected.
• Try to connect the modem with the laptop using an Ethernet cable directly. You only have confirmed that your modem is providing you the internet.

In any case, the router is not reset. Find the reset button in a small hole in the router. By using a thin paper clip or toothpick you can press the button and hold it for 10 seconds.

Important: Resetting the router will back to it’s out-of-the-box state. You will have to redesign the admin password and any settings you will make for the router. Restart your PC’s and connect to the internet.

Setup D-Link Router in Easy Way:

Follow these steps to set up your when D- Link router not working.

Step 1: Open your web browser on your PC.

Step 2: Type the 192.168.0.1 into the address bar section.

Step 3: Type “admin” as the user name and leave the password column.

Step 4: Tap on the “Setup wizard” button.

Step 5: Tap on the “Launch Internet Connection setup wizard “button.

Step 6: To set up an administrator password.

Step 7: Set up your time zone.

Step 8: Choose your internet connection type.

Step 9: Tap on “Copied PC MAC Address”.

Step 10: Store your settings. Tap on the connect button to store your settings. Your router will restart, which may take 1 to 2 minutes.

Creating a Wireless Network and Fix D-Link Router not Connecting to the Internet

Step 1: Sign in to your router.

Step 2: Type 192.168.0.1 in your browser window of your PC is connected to the router through Ethernet.

Step 3: Tap on the “Setup” Tab.

Step 4: Tap on “wireless settings”.

Step 5: Tap on the “Enable Wireless” box.

Step 6: Type the network name which you created.

Step 7: Choose “WPA2” as the “Security Mode”.

Step 8: Set up a strong password and remember it or write it down.

Step 9: Tap on the save “settings” button.

Step 10: Reboot the router after setup D-Link router and keep wait for 1 minute.

Now, your wireless network is active, you can connect with all the devices to a wireless network and fix why is my D'Link router not connecting to the internet.

Tips and Tricks:

• Set up your D-Link router by connecting with a modem through Ethernet cable.
• Resetting your D-Link router is always has the best option if your router is old.

Final Thought:

In the end, I am sure that now you are able to fix your problem, by following the given methods you can solve the problem of the Dlink router not working. And I hope you will find this post helpful and useful.

Please let us know if you have other problems with the Dlink router and share with other people so that they can also take help from this. Thank you for reading this post.

D-Link router is popular for networking brand and manufacturing networking devices like routers, extender, switches, USB adapter, etc. Called them best because they have managed their all product & quality.