How to Setup RockSpace AC1200 RSD0608 Dual Band WiFi Repeater?

You can connect your RockSpace AC1200 RSD0608 Dual Band WiFi Repeater to your router using a wireless connection. It provides full signal coverage with a transmission speed of 300 mbps.

This will provide you with the connectivity you need for your laptops, smartphones, desktops, and tablets. You can easily set up your extender through WPS. Rock Space extender is the perfect choice as a wireless repeater in the year 2020. 

How to Setup Rockspace Extender AC1200 Using Web Browsers?

You can easily set up your Rock Space Wi-Fi extender using your web user interface.

Below are the steps that you need to follow for the same. 

Step 1: Connect your wireless repeater to an electrical outlet close to your router.

Step 2: After that, connect your Wi-Fi device to the Wi-Fi network of your repeater. 

Step 3: Launch any web browser.

Step 4: Enter the IP address 192.168.0.254 in the location bar of your browser.

Step 5: After that, you are required to create a login password. 

Step 6: Choose a Wi-Fi network that you wish to connect to. 

Step 7: Then, enter the password of your wireless network. 

Step 8: Wait for a while and then the "Your Wi-Fi network has extended successfully" page will appear before you on the screen. 

Step 9: After that, relocate your extender for better performance. The ideal location would be to keep it halfway between the dead zone and your Wi-Fi router. 

Step 10: Relocate until you see the W-Fi signal changing to blue, which means there is good Wi-Fi coverage. 

Step 11: After that, you are required to connect your Wi-Fi devices to your Rockspace Wi-Fi repeater. 

Step 12: Now, begin browser using your extended wireless network. 

How to Setup Rockspace RSD0608 Extender with WPS?

You can also set up your Rockspace AC 1200 extender using a WPS button. It is a better way to set up your wireless extender instead of a web browser.

Below are the steps that you need to go through for the same. 

Step 1: First of all, connect your wireless extender to an electrical outlet. Make sure it is close to your router in the same room. 

Step 2: On your router press the WPS button. 

Step 3: Wait for a while and then press the WPS button on your wireless repeater. 

Step 4: Now, wait for the signal LED to change to solid blue. 

Step 5: After that, you are required to change the location of your wireless repeater. You need to keep it halfway between your no signal zone and Wi-Fi repeater. 

Step 6: Relocate till the LED light turns blue. A blue light indicates good Wi-Fi coverage. 

Step 7: After that, you need to connect your Wi-Fi devices to the Rockspace Wi-Fi extender. 

Step 8: Then, download the Rock space RSD0608 extender manual.