How to Install a Netgear Wireless Router Without the CD?

Netgear is one of the most prominent producer of wireless routers, which enables you to use internet on all the computer systems and devices of your office or house without using any network wires. However, you will have to connect your Netgear router to a computer system by using an ethernet wire once. After the installation process is over, then you can disconnect the ethernet wire and link your system to the network by using wireless adapter.

Here are Some of the Steps that You have to Follow in Order to Install a Netgear Wireless Router without the CD:

Step 1: First of all, shut down your computer system. After that, turn off the modem as well.

Step 2: Find the ethernet wire that is connecting your computer system with the modem. Disconnect the ethernet wire from your laptop or computer system.

Step 3: Link the unplugged side of the ethernet wire and connect it to the port that is placed on the back of your Netgear router.

Step 4: Now to configure a Netgear wireless router without the CD, use the ethernet wire that came along with your Netgear router. Now, insert it in the LAN 1 port that is located at the back of your Netgear router. Take the other end of the Ethernet wire and connect it to the back of your personal computer. Insert it exactly like you placed the ethernet wire that you removed in the step 2.

Step 5: Connect the modem to a power source and then turn it on. Now, wait for some time.

Step 6: Now in the next step to fix a Netgear wireless router without the CD, connect the Netgear router to a power source. Then, wait for a few seconds.

Step 7: Start the computer system and check if the lights on your router’s front are blinking or not. All the four lights in front of your router must be turned on.

In case, the third light is not on, then you must take a look at the wire that is connecting the modem and the router. Also, ensure that the connection is secured and your modem is also power on. This is an important step to know how to install a Netgear wireless router without the CD.

In case, the fourth light is not on, then you must ensure that there is no issue in the connection between your computer system and the router. Also, check that your PC is turned on and the connection between your system and router is secure.

Step 8: Now to setup Netgear wireless router without the CD, launch your web browser i.e., Google Chrome, Mozilla Firefox, or Internet Explorer.

Step 9: A login window will pop up in front of you and you will have to enter the username and passwords in the respective sections. Type admin in the username field and password in the section of password.

This is the default SSID and password setting of Netgear router. In case, you are not able to login after entering these credentials, then you can take a look at the paperwork that came together with the router.

Step 10: After logging in you will be able to connect with the router and setup wizard will be launched. This will guide you through the final procedure of how to  setup Netgear wireless router without the CD.

So, these are some of the steps that you are required to follow in order to understand how to configure a Netgear wireless router without the CD.