If you are looking forward to knowing how to factory reset a Linksys RE6350 Wi-Fi repeater, then you have landed on the right page. Here in this guide, you will read out all the necessary steps that you need to carry out in order to know how to reset a Linksys RE6350 Wi-Fi repeater.
Before you start with the process, you need to keep some things in mind. You need to have the username and password of your range extender. Another thing that you need to remember is that once your factory reset your range extender, all the devices connected to it will remain offline till the time your device is totally reconfigured.
There are two methods to factory reset your range extender. You can either perform the factory reset on the device only or you can do it on a computer system with an internet browser.
Step 1: The first thing that you need to do is to search for the reset button given at the side of your wireless repeater.
Step 2: Press and hold the reset button for 10 seconds and then release it.
Your wireless extender will start to reboot and then perform the complete process to factory reset the device.
Step 1: First of all, connect to the Wi-Fi network of your wireless repeater.
Step 2: Launch your internet browser.
Step 3: Enter the 192.168.1.2 IP address assigned to your Wi-Fi repeater in the location bar of the browser.
Alternatively, you can enter extender.linksys.com in the URL section of the browser.
Step 4: The login panel will open up where you will be required to enter the password. Enter "admin" in the password section and then click on login.
Step 5: Go to the administration section and then select Factory Defaults.
Step 6: Select the option of Restore Factory Defaults.
Step 7: Select Ok.
So, these were the two different ways you can apply to reset a Linksys RE6350 Wi-Fi repeater.
DISCLAIMER : is an independent Technical Support Provider. We are not affiliated to any 3rd party brand unless specified. Call vendor for direct Support.
Top Searches in Linksys Support